Standard options on the large shakers include canted
tubs for easy loading and unloading.
Built with tubular steel framing and steel construction
for long life and added noise reducing insulation.
Liners are made with replaceable urethane in a variety of thickness.
Pneumatically controlled lids are easy to open and allow front and top loading of media.
Media discharge door.

Super heavy duty sealed shaft bearings with grease fittings.
Dual main shafts with welded counter-balanced weight.
Forward and reverse controls.
Hinged access doors on rear of machine for inspection and maintenance.
Solvent spray bar is equipped with steel spray nozzles.
Solvent valve allows manual adjustment of solvent flow during operation

Replaceable urethane tub liner extends the life of the shaker for years of service.
Standard units have a heavy-duty wash and drain tray eliminating the need for a solvent work station.
A cold finished steel main shaft and sealed bearings provide trouble free operation and superior life.
The cleaning solution is pumped into the shaker through a submersible Little Giant™
pump built with a nylon pump housing and nylon impeller.
These mighty cleaning machines have long been a popular tool for both
automotive and industrial cleaning applications.
Alternator and starter housings, machined parts, CV's, water pump housings,
connecting rods, castings, valves, basically anything made of metal that needs to be cleaned, can be cleaned in a shaker.
The vibratory action of the media works like little brushes, helping the cleaning solution scrub parts down to bare metal.
Besides cleaning, they’re also great for deburring, buffing, and polishing parts quickly, quietly, and efficiently.
LS Shakers can be shipped complete with a full load of media to get you up and running fast.

Counterbalance weight
Superior bearing life
Shock assist lid for easy operator opening / closings
Solvent pump
Built in solvent tray
Attached wash/drain/dry station
1/2" urethane liner is 100% replaceable
Hinged access door for operator maintenance

All steel cabinet construction
Steel frame and tub
Tub capacity 15 cu. ft
Replaceable urethane tub liner and ends
High density urethane liner with expanded
metal backing
2" diameter shaft with fixed counter balance weight
Heavy duty steel plate end plate support and bearing mounts
Full sound insulation for low noise operation
Cutler - Hammer controls
Solvent pump

All steel cabinet construction
Steel frame and tub
Tub capacity 20 cu. ft
Replaceable urethane tub liner and ends
High density urethane liner with expanded metal backing
2" diameter shaft with fixed counter balance weight
Heavy duty steel plate end plate support and bearing mounts
Full sound insulation for low noise operation
Cutler - Hammer controls
Solvent pump

3000# tumbling media capacity
1500# part capacity

All steel cabinet lined with sound
reducing insulation
Pneumatically controlled lid for easy opening closing.
Lid opens to allow loading from front or above
Super heavy duty sealed shaft bearings with grease fittings
Urethane liner is 100% replaceable
Hinged access door for operator maintenance
Solvent spray bar is equipped with steel spray nozzles
Solvent valve allows manual adjustment of
Solvent flow during operation
Hinged access doors on rear of machine for inspection and maintenance
Sloped front for easy access to parts in such a large machine.

4000# tumbling media capacity
All steel cabinet lined with sound reducing insulation
Pneumatically controlled lid for easy opening / closing
Lid opens to allow loading from front or above
Super heavy duty sealed shaft bearings with grease fittings
Urethane liner is 100% replaceable
Hinged access door for operator maintenance
Solvent spray bar is equipped with steel spray nozzles
Solvent valve allows manual adjustment of
solvent flow during operation
Hinged access doors on rear of machine for
inspection and maintenance
Sloped front for easy access to parts in such a large machine

7000# tumbling media capacity
3,000# part capacity
All steel cabinet lined with sound reducing insulation
tubular steel frame
Pneumatically controlled lid for easy opening closing lid opens to allow loading from front or above
Super heavy duty sealed shaft bearings with grease fittings
Urethane liner is 100% replaceable Hinged access door for operator maintenance
Solvent spray bar is equipped with steel spray nozzles
Solvent valve allows manual adjustment of solvent flow during operation
Hinged access doors on rear of machine for inspection and maintenance
Sloped front for easy access to parts in such a large machine 6" Media discharge door