Design Parameters:
The tumble washer is designed to wash parts placed into the main wash basket.
The basket is belt drive and rotates at 3 RPM.
A stationary wash manifold with large slotted nozzles is positioned beneath
the basket and sprays a heated cleaning solution up into the basket thoroughly cleaning the parts inside.

Construction:
The washer tank and upper vestibule are constructed of 10 gauge sheet steel.
Whenever possible, radius breaks are used to form the metal.
When welding is required, all welds are subject to leak test to ensure the washer is water tight.

Holding Tank:
The holding tank capacity is 180 to 200 gallons.

The water can be heated with electrical heating elements or with natural gas.
Optional heat methods include steam, waste oil and propane.
A thermostat controls the solution temperature and a seven day cycle timer
allows the solution to be heated prior to the work day beginning.
Electric heat 30 KW / Natural Gas RE32 Mid co burner.

Design Parameters:
The tumble washer is designed to wash parts placed into the main wash basket.
The basket is belt drive and rotates at 3 RPM.
A stationary wash manifold with large slotted nozzles is positioned beneath the
basket and sprays a heated cleaning solution up into the basket thoroughly cleaning the parts inside.

Construction:
The washer tank and upper vestibule are constructed of 10 gauge sheet steel.
Whenever possible, radius breaks are used to form the metal.
When welding is required, all welds are subject to leak test to ensure the washer is water tight.

Holding Tank:
The holding tank capacity is 180 to 200 gallons.

Heat:
The water can be heated with electrical heating elements or with natural gas.
Optional heat methods include steam, waste oil and propane.
A thermostat controls the solution temperature and a seven day cycle timer
allows the solution to be heated prior to the work day beginning. Electric heat 30 KW

Tumble Basket:
The standard basket mesh has an opening of 3/4" x 1-15/16".
The basket is constructed of heavy duty mesh grates and endplates.
Two latches located on either side of the basket hold the door in a closed
position during the clean cycle. Basket dimensions are 35" diameter x 33" long.
Optional grates with varying opening sizes are available. 1/2 HP basket drive motor.

Sloped tank design for easy clean out
Manual drag supplied
Evaporator box to reduce/dry waste ( gas heat only )
Automatic cycle timer
Door safety inter-lock
Heavy duty steel grate basket
Basket drive motor and gear reducer
25 horsepower sealless pump
Large volume manifold
High volume spray jets
UL and CSA registered components
EDPM rubber door seal
7 day advance timer
Cycle timer 0-60 minute
Fork lift moving support built into washer

Design Parameters:
LS Industries 17TWB tumble washer with air door is designed to wash parts
placed into the main wash basket.
Baskets are designed to be removed from the machine for loading.
This additional capability is for higher production rates.
A one basket can be loaded while a second basket can be in the tumble washer
with parts being cleaned.
Air-operated door, carts, pneumatic loading and unloading mechanisms speed transfer of baskets.
The basket is belt drive and rotates at 3 RPM.
A stationary wash manifold with large slotted nozzles sprays a heated cleaning solution into
the basket thoroughly cleaning the parts inside.

Construction:
The washer tank and cabinet are constructed of 10 gauge sheet steel.
Whenever possible, radius breaks are used to form the metal. When welding is required,
all welds are subject to leak test to ensure the washer is water tight.

Holding Tank:
The holding tank capacity is 180 to 200 gallons.

Heat:
The water can be heated with electrical heating elements or with natural gas.
Optional heat methods include steam, waste oil and propane.
A thermostat controls the solution temperature and a seven day cycle timer
allows the solution to be heated prior to the work day beginning. Electric heat 30 KW Tumble Basket: The standard basket mesh has an opening of 3/4" x 1-15/16".
The basket is constructed of heavy duty mesh grates and endplates.
Basket dimensions are 35" diameter x 33" long.
Optional grates with varying opening sizes are available.
1/2 HP basket drive motor.