|
Model AM Straight Side Press |
||||
|
|
The model AM straight side press is a more traditional style of straight side with much more left to right bed and ram area. The AM is able to hold tolerance left to right much better than a direct hydraulic design due to its bellcrank linkage that gives the press full tonnage from one end of the press to the other. This single cylinder design develops full tonnage anywhere along the bed left to right and front to back. The bellcrank linkage system is actuated with a single cylinder utilizing A660 bronze at the bearing points. |
| ||
|
Model AM200-10 |
200 tone press in automated feed line & optional paint | |||
| These bearings are
Designed to withstand up to 6 times the machines overall tonnage
and they are covered by our extensive 5 year parts warranty.
The model AM is truly designed to accept virtually all
forms of press applications whether it is punching, forming,
blanking, coining, swedging, die tryout, trimming, drawing and so
on. The AM is available up to 600 tons and particularly excels at
progressive die set ups where you have varying amounts of tonnage
being applied across the bed all in the same stroke.
**For Punching Or Blanking applications De-Rate The Overall Press Tonnage By 1/3 |
|
|||
 Massive unitized welded frame | ||||
| Extremely simple low pressure hydraulic system with
cooler | ||||
| Ram mounted controls and/or pedestal controls are
available | ||||
| Enclosed end frames w/windows for pass thru of material,
dies, feeding equipment, etc | ||||
|
400 ton straight side press with optional light curtains, extra t-slots in the bed and ram, automatic lubrication system and air counterbalance system with air tank and optional white paint |
||||
|
Loading Applications For the Model AM Straight Side Press |
||||
 Single cylinder bellcrank linkage system generates full tonnage all across the bed and ram |
|
| ||
|
Center/Off-Center/Left to Right and or Front to Back Loading |
Model AM500-10 | |||
