image
3179 Green Valley Road • Birmingham, AL 35243-3723 • Office: (205) 968-3570 • Fax: (205)-968-1503

 

 

 


 




One New Sharp Vertical Milling Machine LMV 50

One Preowned Tree Vertical Mill

One Preowned Takem Milling Machine

One New Acra LCM-42 Variable Speed Vertical Mill

One New Sharp Vertical Miiling Machine LMV

One Preowned Milwaukee #4 Vertical Mill

 


One New Sharp Vertical Milling Machine

Specifications


Model LMV 50

Specifications

Table
          Working surface: 9" x 50" 
          T-slots - number & size: 3 - 5/8" 
Capacity
          Table Travel; X-Axis: 37" 
          Saddle Travel; Y-Axis: 12" 
          Ram Travel: 12" 
          Quill Travel; Z-Axis: 5" 
          Knee Travel: 16" 
          Spindle to Column (Min-Max): 6-3/4" - 18-1/2" 
          Spindle to Nose to Table: 2-1/8" - 18" 
Spindle
          Motor: 3 HP 
          Wiring Voltage: 220/440V, 3 Phase, 60 Hz 
          Spindle Taper: R-8 
          Speed (Vari-Speed): 60 - 4500 RPM 
          Quill Feed (IPR): 0.0015, 0.003, 0.006" 
          Head Swivel: 360 degree 
          Head tilt; right to left (each way): 45 degree 
          Head tilt; up and down (each way): 45 degree 
General Information
          Floor space (W x L): 7' x 6'5" 
        Net Weight (Approximately): 2,400 lbs. 

Features/Standard Equipment

      3 HP Variable speed drive 
      The LMV's castings are genuine Meehanite, Cast by licensed foundries. 
      A matched pair f Super-Precision ABEC-7 angular contact bearing support the spindle. 
      The Quill is NCN-Ground to a mirror finish and then chromed to fit housings. 
      Spindle runout of no more then 0.0002" T.I.R. 
      Unique pulley design uses precision ground ribs on the inside diameter of the Super-Smooth Speed Change 
      A pair of High-Output fans keep the LMV's powerful 3 HP head cool 
      Unique Double-Nut backlash eliminator 
      Longitudinal Screw accuracy: 0.0008"/20" 
      Rubber ways covers, front and rear 
      Hard-chromed ways 
      Tool kit 

Price

Delivery

Terms

F.O.B.

$POR

Stock, Subject to Prior Sale

Net before Shipment

Point of Destination

         from Warehou

 


     One Preowned Tree Vertical Mill  

Specifications
Table: 10" x 42" 

      Horse Power: 1.5 
      Spindle Speeds: 60 - 3300 
      Powered Knee 
      Power Feed Table 
      Automatic Lube
      Model 2UVR

Price

Delivery

Terms

F.O.B.

     $7,900.00   

Stock, Subject to Prior Sale

   Net before Shipment

    Point of Destination

         from Warehouse



 One Preowned Takem Mill

Specifications

      Table: 9" x 42" 
      3 HP 
      Spindle Speeds: 65 - 5000 
      Coolant Pump 
      1 Shot Lubricant 
    Model  TK-942

Price

Delivery

Terms

F.O.B.

     $4,900.00   

Stock, Subject to Prior Sale

   Net before Shipment

    Point of Destination

         from Warehouse



One New Acra LCM-42 Variable Speed Vertical Mill 

Specifications


Model LCM-42

Specifications

      Table Working Surface: 9" x 42" 
      T-Slots Number and Size: 3 slots, 5/8" 
      Travels (X, Y, Z): 30" x 12" x 5" 
      Ram Travel: 12" 
      Knee Travel: 16" 
      Spindle to Column: 6-3/4" - 18-1/2" 
      Spindle Nose to Table: 2-1/8" - 18" 
      Spindle Motor: 3 HP 
      Spindle Nose Taper: R-8 
      Spindle Speeds: 60-4,500 RPM/*50-5,000 AC Drive 
      Quill Feed 3 Speeds: 0.0015, .003, .006" 
      Head Swivels: 360 degree 
      Head Tilt (Lt Rt): 45 degree 
      Head Tilt (Up Down): 45 degree 
      Floor Area (W x D x H): 7' x 6-1/2' x 6-3/4' 
      Weight: 2,400 LBS
      *LCM-42/50 available with Yasakawa AC inverter drive pack 

Features

      ISO 9002 Certified: "Built to World Industrial Standards" 
      Meehanite Castings: Highest grade of casting possible 
      High Out-Put Head Cooling Fans: Ensures vari-drive and motor run at optimal temperatures extending belt life, pulleys & bearings 
      ABEC-7 Spindle Bearings: The quill is ground and hard, chromed and fitted to housing w/a max spindle runout of 0.0002" T.I.P. 
      Motor Shaft and Vari Drive: Are dynamically balanced, then chromed for a flawless fit, w/ground ribs on inside diameter. Motor shaft has an oil channel w/grease fitting. 
      Lubrication: One shot lubricaton system ensures table knee, and lead-screw are lubricated. 
      Double Nut Backlash Design: Keeps backlash at .0008 over 20" travel 
      Table and Saddle: They are mounted w/preloaded thrust bearings, eliminating endplay for precise control of lateral movement. 
      Ways are Hard-Chrome Dovetail on Saddle & Column Patented Knucle Design: Uses 6 bolts - 3 per side, securing them from the outside. This method locks the head securely resulting in greater accuracy and performance. 
      Hand Scraped Saddle and Knee Oil Grooves are Milled. The LCM Mill: uses a roller bearing for the lower support og the motor shaft to ensure proper loading, support, and alignment. 



      Please contact us for ordering non-stock machines - a full quotation including options & accessories will be sent to you. 

Price

Delivery

Terms

F.O.B.

$8,700

Stock, Subject to Prior Sale

Net before Shipment

Point of Destination

         from Warehou


One New Sharp Vertical Mill 

 

Specifications

9" x 42" Table 
3 Horse Power Motor 
R-8 Spindle 
Variable Speed 60 - 4500 RPMS 
Chrome Ways 
Power Feed Table 
Acu-Rite Digital Read Out 
One Shot Lube 
    Model LMV

Price

Delivery

Terms

F.O.B.

     $POR   

Stock, Subject to Prior Sale

   Net before Shipment

    Point of Destination

         from Warehouse


 

  One Preowned Milwaukee #4 Vertical Mill

Specifications
Table size: 16" x 74"
T-Slots (3): 13/16" Width
Longitudinal power feed: 44"
Cross power feed: 14"
Speeds (24): 15 - 1500 RPM

Equiped With:
Power feed on all axes

Price

Delivery

Terms

F.O.B.

$4,500

Stock, Subject to Prior Sale

Net before Shipment

Point of Destination

         from Warehouse

Machine Tools South - Used and New Machinery - Metal Fabricating, CNC Machine Tools image image image