image
3179 Green Valley Road • Birmingham, AL 35243-3723 • Office: (205) 968-3570 • Fax: (205)-968-1503

 


One Preowned Dake MEP Non-Ferrous Cold Saw

One Preowned Trennjager PMC-8 Cold Saw

One Preowned Trennjager PMC-8L Cold Saw

One Preowned Kaltenbach Circular Saw

One Preowned Eisele Automatic Non-Ferrous Cut-Off Saw

One New Hyd-Mech Pivot Arm Cold Saw Model P350

One New Scotchman Cold Saw

One Preowned MEC Brown Cold Saw

One New Hyd-Mech Manual Pivot Arm Bench Model Cold Saw Model P225 


Back To Top 

One Preowned Dake MEP Non-Ferrous Cold Saw 

Specifications

      Cutting capacity 90 hollow: 4-3/4" Round; 4" Square; 7" x 2-3/4" Rectangle 
      Cutting capacity 90 solid: 3-1/2" Round; 3" Square; 3" x 3" Rectangle 
      Cutting capacity 45 (L&R) hollow: 4-1/2" Round; 3-3/4" Square; 5-1/3" x 2-1/2" Rectangle 
      Cutting capacity 45 (L&R) solid: 3" Round; 2" Square; 2" x 3" Rectangle 
      Cutting capacity 45 tilted hollow: 2" Round; 2" Square; 5-1/3" x 1-1/3" Rectangle 
      Cutting capacity 45 tilted solid: 2" Round; 2" Square; 7" x 3/4" Rectangle 
      Shuttle stroke length: 20" 
      Blade size: 14" Max 
      Motor: 2/3 HP, 220 volt 
      Weight: 1,267 lbs. 
      Dimensions: 93" x 67" x 69" 



Price

Delivery

Terms

F.O.B.

        $11,500

Stock, Subject to Prior Sale

Net before Shipment

       Point of Destination

        from Warehouse


 


 One Preowned Trennjaeger PMC-8 Cold Saw

Specifications:

      Cutting @ 90 degrees: 8-1/2"H x 24" 
      Cutting @ 45 degrees: 7-1/2"H x 17 
      Blade Size: 24" 
      Blade Speeds (6 speeds): 16 to 50 RPM 
      Blade Motor: 4.0/3.3 HP 
      Voltage: 220/3/60 
      Dimensions: Floor Space - 114" x 45" 
        Height: 90" 
        Weight: 6,000 LBS 
Equipped With
      3 - Hydraulic Vertical Clamps 
      1 - Hydraulic Swivel Vice for Miter Cutting 
      Blade Stablizer for Accurate Cutting 
      Coolant System 
    Controls: Coolant, Blade Speed, Clamping, Feed Regular 


Price

Delivery

Terms

F.O.B.

        $12,000

Stock, Subject to Prior Sale

Net before Shipment

       Point of Destination

        from Warehouse



 Back To Top

One Preowned Trennjager PMC 8L Cold Saw 

Specifications:

      Blade Diameter: 660 mm 
      Max. Traverse of the Blade: 1000 mm 
      Round Bar Capacity: 170 mm 
      Sheet Capacity: 120 x 1000 mm 
      I Capacity: 600 x 220 mm 
      U Capacity: 400 x 110 mm 
      Capacity @ 45 degree in U: 400 x 110 mm 
      Capacity @ 45 in I: 600 x 220 mm 
      Capacity @ 45 in the Sheet: 120 x 450 mm 
      Band Saw Speeds: 6 
      Cutting Speed: 16 to 44 m/mn 


Price

Delivery

Terms

F.O.B.

        $14,900.00

Stock, Subject to Prior Sale

Net before Shipment

       Point of Destination

        from Warehouse







One Preowned Kaltenbach Circular Saw

 

Specifications:

 Model: MSK400A

      Blade Diameter: 14 1/2" / 15 3/4" 
      Cutting Range Round: 4 3/4" / 5 9/32" 
      Flat Bar: 7" x 3 1/8" / 7 7/8" x 3 1/8" 
      Blade Speed: Infinitely Variable / 0 - 12 IPM 
      Auto Feed Length: 1/16" to 52 1/4" (any desired value) 
      Hydraulic Power: 5 HP, 3 Phase, 220 Volt 


Price

Delivery

Terms

F.O.B.

        $11,500

Stock, Subject to Prior Sale

Net before Shipment

       Point of Destination

        from Warehouse




Back To Top

One Preowned Eisele Automatic Non-Ferrous Cut-Off Saw

Specifications:

Model: VAL 069

      Blade diameter: 14" 
      Cutting range solids: 4.5" 
      Cutting range tubes: 5" 
      Cutting range hollow profiles: 6" x 4" 
      Feed speed (head): 0 - 1.5" / second 
      Return speed (head): 3" / second 
      Cut-off length: 0 - 23-1/2" 
      Material feed speed: 4.5" / second 
      Material return speed: 4.5" / second 
      Main motor: 7 HP 230 Volts

 



Price

Delivery

Terms

F.O.B.

        $7,900        

Stock, Subject to Prior Sale

Net before Shipment

       Point of Destination

        from Warehouse


 


 Back To Top

One New Hyd-Mech Pivot Arm Cold Saw

Specifications:

      Capacity Round Hollow: 90 degree 4-1/2";
            45 degree (L) 4"; 45 degree (R) 3" 
        Capacity Square Hollow: 90 degree 4" x 4";
              45 degree (L) 3-1/3"; 45 degree (R) 3" 
Capacity Rectangular Hollow (l x h): 90 degree 5-1/8" x 3-1/8";
            45 degree (L) 3-1/2" x 3-1/3"; 45 degree (R) 3-1/2" x 2-1/2" 
      Capacity Round Solid: 90 degree 2"; 45 degree (L) 1-1/2";
            45 degree (R) 1-1/2" 
      Capacity Square Solid: 90 degree 2";
            45 degree (L) 1-1/2"; 45 degree (R) 1-1/2" 
      Capacity Rectangular Solid (l x h): 90 degree 2" x 2";
             45 degree (L) 2" x 1-1/2"; 45 degree (R) 2" x 1-1/2" 
      Above capacities apply to low carbon metal applications only 
      Dimensions (w x l x h): 50" x 46" x 70" 
      Weight: 575 lbs 
      Motor: 1.5 HP / 3 HP 
      Blade speed: 30/60 rpm 
      Blade size: Max. 14" Min. 12"

 

Standard Equipment

         
Manual saw head movement by means of control
             handle with safety spring loaded trigger switch to start or stop blade 
      2 Blade speed - 30 & 60 rpm 
      Robust Sawing head, which can miter up to 45 degrees left & right 
      Movement of both head and vise to permit Slotting or lengthwise cuts 
      Adjustable Manual vise with anti-burr clamp, clamping on both sides of the cut 
      Vise quick clamp and release lever 
      Material Stop rod for multiple cuts of the same length 
      Flood Cooland with electrical submergible coolant pump 
    1 blade 350 x 2.5 x 32 Z=180


Price

Delivery

Terms

F.O.B.

        $5,700.00        

Stock, Subject to Prior Sale

Net before Shipment

       Point of Destination

        from Warehouse


 


 Back To Top

One New Scotchman Cold Saw

Specifications:

Cutting Speeds (FPM)

           
Speed 1 - Speed 2 HT: 158/316 
      Speed 1 - Speed 2 LT: 79/158 

Spindle Speeds (RPM)

           
Speed 1 - Speed 2 HT: 44/88 
      Speed 1 - Speed 2 LT: 22/44 

Motor Rates (H.P.)

           
Position 1 Position 2 HT: 2/2.7 
      Position 1 Position 2 LT: 1/2 

Pump: 0.1 

      Maximum Blade Diameter: 14" 
      Spindle Hole Diameter: 1-9/16" 
      Pin Hold Spacing: 4/12/64 
      Maximum Vise Opening: 6" 
      Down Feed: Manual 
      Power Supply: 220, 440, or 575 Volt 3 Phase, 60 HZ 
      Dimension W x L x H: 22" x 17-1/2" x 69" with handle 
      Weight: 675 lbs. 

Maximum Recommended Capacities

Tubing

             
Round: 90 Degree 4-7/8" / 45 Degree 4-3/8" 
             Square: 90 Degree 4-3/8" x 4-3/8" / 45 Degree 4" x 4" 
            Rectangle: 90 Degree 5-1/2" x 4" / 45 Degree 4" x 4" 

Solid

             
Round: 90 Degree 2" / 45 Degree 1-3/4" 
             Square: 90 Degree 2" x 2" / 45 Degree 1-3/4" x 1-3/4" 



Price

Delivery

Terms

F.O.B.

        $6,195.00

Stock, Subject to Prior Sale

Net before Shipment

       Point of Destination

        from Warehouse


 



Back To Top

One Preowned MEC Brown Cold Saw 

Specifications:

       Model 350

          2 Speed Saw Head 3 PH/220V/1.5- 2 HP 
          Standard Blade Rotation 52-104 RPM 
          Minimum Blade Diameter 9” 
          Maximum Blade Diameter 12-1/2” 
          Cutting Capacity: 
            Pipe 4” 
            Square Tube 3-1/2” 
            Round & Square Bar 2” 
          Clamping Vise: 
            Max. Opening 4.1” 
            Width of Jaws 4.3” 
            Height of Jaws 2” 
            Back Jaw Rotation Max. 8 Degrees 
          Coolant Tank Capacity .8 gallon 
          Diaphragm Coolant Pump
          Adjustable coolant flow to both sides of blade 
          Screened coolant filter – top-side immersion 
        Manual included 

 

 




Price

Delivery

Terms

F.O.B.

        $ 1,895.00     

Stock, Subject to Prior Sale

Net before Shipment

       Point of Destination

        from Warehouse



 

One New Hyd-Mech Manual Pivot Arm Bench Model Cold Saw 

Specifications:

       Model P225

      Sawing Capacity @ 90 degrees - 
      Round Tube: 2-1/2" 
      Square Tube: 2-1/4" x 2-1/4" 
      Rectangle Tube: 2-1/2" x 2" 
      Solid Rounds: 1" 
      Solid Squares: 3/4"x 3/4" 
      Sawing Capacity @ 45 degrees - 
      Round Tube: 2" 
      Square Tube: 2-1/4" x 2-1/4" 
      Rectangle Tube: 1-1/2" x 1" 
      Solid Rounds: 1/2" 
      Solid Squares: 1/2" x 1/2" 
 

Equipped With 

          9" Blade 
          Manual saw head and vise 
          Material stop 
          Flood coolant with pump 
          IP55 control handle with switch 
        Miters 45 degrees to the left only



Price

Delivery

Terms

F.O.B.

        $ 1,190.00       

Stock, Subject to Prior Sale

Net before Shipment

       Point of Destination

        from Warehouse


 



Machine Tools South - Used and New Machinery - Metal Fabricating, CNC Machine Tools image image image