image
3179 Green Valley Road • Birmingham, AL 35243-3723 • Office: (205) 968-3570 • Fax: (205)-968-1503

 

 

Standard Industrial Company

Press Brakes AB Series [100 to 150 to 200 Tonnage Presses]

   
 
Our brakes were specifically designed for the following applications
  • Full length bends where full tonnage across the bed is a necessity for the truest bends
  • Off-center loading when any amount of the brakes tonnage is needed across the bed
  • Center loading where any amount of the brakes tonnage is required
  • Multiple die set-ups across the bed that require varying amounts of tonnage
  • Punching applications in one area or at varied locations across the bed - each brake has a counter balance valve to allow the least shock to the hydraulic system
  • Short piece work, with some of the fastest ram speeds on any brake, your small piece work is done quickly, easily and with precision.
  • Any Size Facility will benefit for the Standard Industrial brake from the price conscious smaller facility that does piece by piece work up to the 3 shifts a day high production manufacturers that require dependable, low maintenance machines with readily available components for minimal downtime

 

 


 

 



Press Brakes AB Series [250 to 325 to 400 Tonnage Presses]



   

Our brakes were specifically designed for the following applications


Full length bends where full tonnage across the bed is a necessity for the truest bends

  • Off-center loading when any amount of the brakes tonnage is needed across the bed
  • Center loading where any amount of the brakes tonnage is required
  • Multiple die set-ups across the bed that require varying amounts of tonnage
  • Punching applications in one area or at varied locations across the bed - each brake has a counter balance valve to allow the least shock to the hydraulic system
  • Short piece work, with some of the fastest ram speeds on any brake, your small piece work is done quickly, easily and with precision.
  • Any Size Facility will benefit for the Standard Industrial brake from the price conscious smaller facility that does piece by piece work up to the 3 shifts a day high production manufacturers that require dependable, low maintenance machines with readily available components for minimal downtime
 
 

Press Brakes AB Series [500 to 600 to 700 to 1,000 Tonnage Presses]

   
 

Our brakes were specifically designed for the following applications


    Full length bends where full tonnage across the bed is a necessity for the truest bends

  • Off-center loading when any amount of the brakes tonnage is needed across the bed
  • Center loading where any amount of the brakes tonnage is required
  • Multiple die set-ups across the bed that require varying amounts of tonnage
  • Punching applications in one area or at varied locations across the bed - each brake has a counter balance valve to allow the least shock to the hydraulic system
  • Short piece work, with some of the fastest ram speeds on any brake, your small piece work is done quickly, easily and with precision.
  • Any Size Facility will benefit for the Standard Industrial brake from the price conscious smaller facility that does piece by piece work up to the 3 shifts a day high production manufacturers that require dependable, low maintenance machines with readily available components for minimal downtime

 


 

 

 

AS250 Guillotine Shears

 

 

   
    • All Components Readily Available From Your Local Suppliers
    • Precision Guillotine Drive Providing the Best Shearing System Available
    • 36" travel PLC backgauge w/Go-To function & multi-job programming                                                                                                                            
    • Infinitely Variable, Manual, Quick-Change Blade Gap Adjustment
    • 80,000 PSI Capacity rated
    • Manual Swing-Away Backstop
    • 5 Year Parts Warranty
    • 5 Year limited onsite labor warranty
    • Lifetime telephone support at no charge
    • 4' squaring arm with scale

 


 

AS500 Guillotine Shears


 

 

   

 

 

 


 

AS625 Guillotine Shears

   
 

Ask any professional fabricator and they will tell you there is no substitute for an American made, true guillotine drive system when shearing. The lower quality, typically foreign made swingbeam or rocker arm style competitors attempt to compare themselves to a guillotine but all fail. No other shear design can compare when it comes to the power and precision delivered by the straight line cutting action of a Standard shear. 

 


 

Model AP Four Column Press

   
 
The model AP Four column press is a vertical, down acting direct hydraulic press with a guided platen powered by an extremely heavy duty machine tool quality hydraulic cylinder. The precision machined platen is fitted with bearings made of A660 bronze and rides on 4 columns of turned, ground & polished chrome steel. The massive structure is fabricated from heavy sections of prime steel plate. This press is designed for heavy production work for all sizes of facilities. The self-contained hydraulic system uses a hi-low circuit using directional valves for speed control. As with all Standard Industrial machines, the model AP comes with our unmatched 5 year warranty, plus T-slots in the bed and ram, a decompression system, overload protection and many more impressive standard features.

Model AP1000 (1,000 ton) shown with optional rubber pad enclosure mounted under ram. All other features shown are standard equipment.

The dimensions listed are from our catalog but we are more than happy to quote custom bed and ram sizes per your specifications

 

 


 

 

Model DC C-Frame Press

   
 
The model DC is an exceptionally heavy duty C-frame style press that is specifically designed to handle virtually any application. It is perfect for applications requiring off-center and center-loads and un-even and even tonnages across the bed. Available in tonnages from 40 up to 600 tons (larger tonnages available with special quote). It can be used for metalworking, plastics, fabrics and many other materials as well.

The model DC has an open gap frame and an extremely heavy duty box-guided ram with 8 way gibbing. This combination is the most effective way to guide the ram and provide the precision most facilities require. The ram is powered by a very efficient hydraulic power plant utilizing low pressure (under 3,000 psi) to guarantee long life of the system. This system powers the single machine tool quality cylinder shaft made of turned ground and polished chrome.

A Hydraulic press of this type offers full tonnage throughout the stroke and 3 ram speeds (fast approach, slow press and fast return). This is useful for a variety of work such as forming, punching, drawing plus any other even tonnage application. With exceptional speeds and bed sizes as well long stroke and open height, you will find the base machine to fit most customer requirements. The model DC comes with (2) 5/8" t-slots machined in the bed and ram and is available with additional slots and/or drilled and tapped holes added for tool mounting. There are a wide variety of options to choose from as well to customize the press to your exact needs.

100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another "orphaned" machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.

 

 

 

 

 

 

 

 

 

Machine Tools South - Used and New Machinery - Metal Fabricating, CNC Machine Tools image image image