MACHINE TOOLS SOUTH
3171 Green Valley Road • Birmingham, AL 35243 • Office: (205) 968-3570 • Fax: (888) 235-8257


Back to available Ironworkers & Saws



Angle Shear
The angle shear allows for both straight and miter cuts of varying sizes of angle materials without a drop-out slug. The two alignment guides assure the squareness of every cut while the adjustable holddown keeps distortion to a minimum. The angle shear blades have four useable sides and are easily changed.


SPARTAN IRONWORKER SPECIFICATIONS
Capacities & Specifications Rated on 65,000 PSI Tensile
  IW66D IW88D IW110D/2 IW135D
IW180DX

Work Stations

 5 5 5 5 5

Punching

          

Punching Pressure

 66 tons 88 tons 110 tons 135 tons 180 tons

Standard Tooling*

 1-1/2" in 3/8" 1-1/2" in 9/16" 1-1/2" in 11/16" 1-1/2" in 7/8" 1-1/2" in 1-3/16"

Large Tooling**

 2" in 5/16" 2" in 1/2" 2" in 3/8" 2" in 1/2" 2" in 7/8"

Oversize Tooling**

 6" in 3/32" 6" in 1/8" 8"in 1/8" 8"in 5/32" 8" in 7/32"

Throat Depth

 12" 12" 12" 12"  

DX Series

 20" 20" 20" 20" 20"

Channel Flange Max.

 7" 7" 7" 7" 7"

Stroke Length

 4" 4" 4" 4" 4"

Cycle/Min. (3/4")

 30 29 24 28 29

Work Height

 41-1/4" 41-1/4" 41-1/4" 41-1/4" 41-1/4"

Flat Bar Shearing

          

Flat Bar Shear

 14" in 9/16" 17" in 5/8" 24" in 5/8" 24" in 11/16 30" in 3/4"

Width and Thickness

 10" in 3/4" 12" in 3/4" 14" in 1" 16" in 1" 16" in 1-1/8"

Blade Length

 14-1/8" 18" 24-3/8" 24-3/8" 30-1/4"

Angle Flange Trim

 4" 4" 4" 4" 4"

Work Height

 36" 36-1/2" 38" 36" 36"

Angle Shear

          

90 Degrees

 5" x 5" in 1/2" 6" x 6" in 1/2" 6" x 6" in 1/2" 6" x 6" 11/16" 8" x 8" in 3/4"

45 Degrees

 2-1/2"x2-1/2" in 5/16" 3-1/8"x3-1/8"in 3/8" 3-1/8"x3-1/8"in 3/8" 3-1/8"x3-1/8"in 3/8" 3-1/8"x3-1/8"in 3/8"

Work Height

 43-3/4" 45-3/4" 48-1/4" 46-1/2" 46-1/2"

Bar Shearing

          

Round Bar

 1-1/2" 1-3/4" 1-3/4" 2" 2-1/4"

Square Bar

 1-1/2" x 1-1/2" 1-3/4" x 1-3/4" 1-3/4" x 1-3/4" 2" x 2" 2-1/4" x 2-1/4"

Channel Shear**

 5"* 6"* 6"* 7"* 8"*

I Beams***

 5"* 6"* 6"* 7"* 8"*

Work Height

 48" 50" 52-3/4" 51-1/2" 54"

Notching

          

Rectangular Notcher

 2" x 3-1/2" in 3/8" 2" x 3-1/2" in 1/2" 2" x 3-1/2" in 1/2" 2" x 3-1/2" in 1/2" 2" x 3-1/2" in 5/8"

V-Notcher@Notcher Station ***

 3-1/2" x 3-1/2" in 3/8"* 3-1/2" x 3-1/2" in 1/2"* 3" x 3" in 1/2" 4" x 4" in 1/2" 4" x 4" in 5/8"

V-Notcher@Punch Station ***

 5-3/4" x 5-3/4" in 5/16"* 5-3/4" x 5-3/4" in 3/8"* 4" x 4" in 1/2" 5-3/4 x 5-3/4" in 1/2"* 5-3/4" x 5-3/4" in 1/2"*

Work Height

 35-3/4" 36-1/2" 36" 36-1/4" 36-1/4"

Special Tooling

          

Single Vee Press Brake ****

 10" x 9/16" 10" x 9/16"* 10" x 3/4" 10" x 3/4" 10" x 3/4"

Multi Vee Press Brake

 20" x 3/16" 20" x 3/16" 27-1/2" x 3/16" 27-1/2" x 3/16" 27-1/2" x 3/16"

Pipe Notcher

 4" Max * 4" Max * 4" Max * 4" Max * 4" Max *

Angle Bending

 4" x 1/4" * 4" x 5/16" * 4" x 1/2" * 4" x 1/2" * 4" x 1/2" *

Drive Motor

 7.5HP 10HP 10HP 15HP 20HP

Net. Wt. D.

 3,969 lbs. 4,807 lbs. 6,505 lbs 7,365 lbs.  

DX:

 4,851 lbs. 5,844 lbs 7,608 lbs. 8,710 lbs. 10,915 lbs.

Machine Dimensions D:

 68" x 31" x 67" 73" x 33" x 68" 83" x 33" x 71" 86" x 35" x 73"  

DX:

 82" x 31" x 67" 88" x 33" x 68" 97" x 33" x 68" 98" x 35" x 73" 107" x 35" x 79"


STANDARD EQUIPMENT

Standard Features
• (5) Sets of Punch & Dies: 9/16", 11/16", 13/16", 15/16", 1-1/16"
• 3' Electric Adjustable Back Gauge (36")
• Scrap Box at Punch & Notching Stations
• Keyed Punch Holder For Shaped Tooling
• 24 Volt DC Control Voltage
• Adjustable Stroke Depth at Punch Station
• Full Control Foot Pedal
• Magnetically Mounted Work Light
• Two Hole Die Holder (D & DX Series Only)
• Two Piece Gauging Table
• Adjustable Back Stop On Punch Table

Flat Bar Support Table With Guides
Variable Degree Miter Cutting
On Angle Flange

45 Degree Miter Cutting On Angle
Electric Back Gauge 3' Length

See-Through Adjustable Punch Stripper
Squaring Guides On Angle Shear


OPTIONAL EQUIPMENT


MULTI VEE PRESS BRAKE
SINGLE VEE PRESS BRAKE

PIPE NOTCHER
VEE NOTCHER (PUNCH END)

LARGE HOLE PUNCH
COPY TABLE

VEE NOTCHER
MULT-STOP GAUGE TABLE

CHANNEL SHEAR
DIE HOLDER FOR
PUNCHING CHANNEL WEBS

HYDRAULIC HOLDDOWN FOR FLAT BAR SHEAR
Items Not Shown
• 6' ELECTRICAL ADJUSTABLE BACK GAUGE
• PIPE PUNCH DIE HOLDER AND STRIPPER
• HYDRAULIC STRIPPER




For more information and pricing contact,
Sales
 3171 Green Valley Road
Birmingham, AL 35243
Office: (205) 968-3570
Fax: (888) 235-8257
E-mail: Sales@MachineToolsSouth.com